首先在介紹MySQL 主從時，我們來看看 DB-Engines 排行榜上四月數據庫的變化，前三甲居然都有小幅度增長，相反增長迅猛的 PG 和 MongoDB 有所減少，一個月的增長趨勢說明不了問題，下圖是從 13 年開始的趨勢圖，Oracle 和 MySQL 漸漸趨平，學習了解 MySQL 還是很有必要的。下面開始進入正題。
（圖源：http://db-engines.com/en/ranking）
主從復制的原理
MySQL的主從復制中主要有三個線程：master（binlog dump thread）、slave（I/O thread 、SQL thread），Master一條線程和Slave中的兩條線程。
（1）master服務器將數據的改變記錄二進制binlog日志，當master上的數據發生改變時，則將其改變寫入二進制日志中；
（2）slave服務器會在一定時間間隔內對master二進制日志進行探測其是否發生改變，如果發生改變，則開始一個I/OThread請求master二進制事件
（3）同時主節點為每個I/O線程啟動一個dump線程，用于向其發送二進制事件，并保存至從節點本地的中繼日志中，從節點將啟動SQL線程從中繼日志中讀取二進制日志，在本地重放，使得其數據和主節點的保持一致，最后I/OThread和SQLThread將進入睡眠狀態，等待下一次被喚醒。
（圖源 深入淺出 MySQL 數據庫開發、優化與管理維護）
由于資源限制沒有那么多機器，本次使用一臺原先裝過 Oracle 和 OGG 的主機構建一主兩從的MySQL 環境，通過三個不同的端口 3306、3307、3308 加以區分。
一、系統準備
0、查看系統版本
cat /etc/redhat-release
Red Hat Enterprise Linux Server release 7.6 (Maipo)
1、關閉防火墻
systemctl stop firewalld.service或者systemctl stop firewalld
systemctl disable firewalld.service或者systemctl disable firewalld
systemctl status firewalld
2、關閉 selinux
getenforce
setenforce 0
vim /etc/selinux/config
SELINUX=disabled
[root@Ops-11gOGG ~]# systemctl status firewalld
? firewalld.service - firewalld - dynamic firewall daemon
Loaded: loaded (/usr/lib/systemd/system/firewalld.service; disabled; vendor preset: enabled)
Active: inactive (dead)
Docs: man:firewalld(1)
[root@Ops-11gOGG ~]# getenforce
Disabled
3、/etc/hosts解析
示例如下
192.168.77.86 Ops-11gOGG
4、配置 yum 源，安裝依賴 rpm 包
yum -y groupinstall "DeveLopment tools"
yum -y install ncurses ncurses-devel openssl-devel bison gcc gcc-c++ make
5、清理系統環境
Linux7 版本的系統默認自帶安裝了MariaDB，需要先清理。
## 查詢已安裝的mariadb
rpm -qa |grep mariadb
或
yum list installed | grep mariadb
## 卸載mariadb包，文件名為上述命令查詢出來的文件
rpm -e --nodeps mariadb-libs-5.5.60-1.el7_5.x86_64
yum -y remove mariadb-libs.x86_64
二、安裝 MySQL8.0.28
0、創建實例所需目錄
本手冊中 3306 為一個實例，如部署多實例請按照下面目錄結構創建目錄
--root用戶操作：
mkdir -p /mysql/data/mysql3306
mkdir -p /mysql/app/
mkdir -p /mysql/conf/
mkdir -p /mysql/data/mysql3306/data/
mkdir -p /mysql/data/mysql3306/pid/
mkdir -p /mysql/data/mysql3306/socket/
mkdir -p /mysql/data/mysql3306/log/
mkdir -p /mysql/data/mysql3306/binlog/
mkdir -p /mysql/data/mysql3306/relaylog/
mkdir -p /mysql/data/mysql3306/slowlog/
mkdir -p /mysql/data/mysql3306/tmp/
mkdir -p /mysql/data/mysql3307
mkdir -p /mysql/data/mysql3307/data/
mkdir -p /mysql/data/mysql3307/pid/
mkdir -p /mysql/data/mysql3307/socket/
mkdir -p /mysql/data/mysql3307/log/
mkdir -p /mysql/data/mysql3307/binlog/
mkdir -p /mysql/data/mysql3307/relaylog/
mkdir -p /mysql/data/mysql3307/slowlog/
mkdir -p /mysql/data/mysql3307/tmp/
mkdir -p /mysql/data/mysql3308
mkdir -p /mysql/data/mysql3308/data/
mkdir -p /mysql/data/mysql3308/pid/
mkdir -p /mysql/data/mysql3308/socket/
mkdir -p /mysql/data/mysql3308/log/
mkdir -p /mysql/data/mysql3308/binlog/
mkdir -p /mysql/data/mysql3308/relaylog/
mkdir -p /mysql/data/mysql3308/slowlog/
mkdir -p /mysql/data/mysql3308/tmp/
1、創建數據庫用戶和組
groupadd mysql
useradd -g mysql mysql
chown -R mysql:mysql /mysql
passwd mysql
2、上傳解壓安裝包并重命名
如下鏈接，選擇相關的版本和系統。
https://dev.mysql.com/downloads/mysql/8.0.html
MD5:?5be32f68d6859aace1eb61cea1d00bff?
mysql用戶操作：
cd /mysql/app
md5sum mysql-8.0.28-linux-glibc2.12-x86_64.tar.xz --檢驗 MD5 值和上面一樣，說明包無損
tar xvf mysql-8.0.28-linux-glibc2.12-x86_64.tar.xz
mv mysql-8.0.28-linux-glibc2.12-x86_64 mysql8.0.28
3、配置mysql用戶環境變量
vim ~/.bash_profile
MYSQL_HOME=/mysql/app/mysql8.0.28
PATH=$PATH:$HOME/.local/bin:$HOME/bin:$MYSQL_HOME/bin
source ~/.bash_profile
which mysql
4、創建參數文件
由于是二進制文件安裝，數據庫參數文件需要自己配置，以下是簡單的參數配置。其他參數可依照個人需求添加。
vim my3306.cnf
[mysqld]
# basic settings #
server_id = 863306
basedir = /mysql/app/mysql8.0.28
datadir = /mysql/data/mysql3306/data/
socket = /mysql/data/mysql3306/socket/mysql3306.sock
pid_file = /mysql/data/mysql3306/pid/mysqld3306.pid
port = 3306
default-time_zone = '+8:00'
character_set_server = utf8mb4
explicit_defaults_for_timestamp = 1
autocommit = 1
transaction_isolation = READ-COMMITTED
secure_file_priv = "/mysql/data/mysql3306/tmp/"
max_allowed_packet = 64M
lower_case_table_names = 1
default_authentication_plugin = mysql_native_password
sql_mode = 'STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_ENGINE_SUBSTITUTION'
# connection #
back_log = 500
interactive_timeout = 300
wait_timeout = 300
lock_wait_timeout = 300
max_user_connections = 800
skip_name_resolve = 1
max_connections = 3000
max_connect_errors = 1000
#table cache performance settings
#table_open_cache = 1024
#table_definition_cache = 1024
#table_open_cache_instances = 16
#session memory settings #
#read_buffer_size = 16M
#read_rnd_buffer_size = 32M
#sort_buffer_size = 32M
#tmp_table_size = 64M
#join_buffer_size = 128M
#thread_cache_size = 256
# log settings #
slow_query_log = ON
slow_query_log_file = /mysql/data/mysql3306/slowlog/slow3306.log
log_error = /mysql/data/mysql3306/log/mysqld3306.log
log_error_verbosity = 3
log_bin = /mysql/data/mysql3306/binlog/mysql_bin
log_bin_index = /mysql/data/mysql3306/binlog/mysql_binlog.index
# general_log_file = /data/mysql/mysql57_3306/generallog/general.log
log_queries_not_using_indexes = 1
log_slow_admin_statements = 1
#log_slow_slave_statements = 1
#expire_logs_days = 15
binlog_expire_logs_seconds = 2592000
long_query_time = 2
min_examined_row_limit = 100
log_throttle_queries_not_using_indexes = 1000
#log_bin_trust_function_creators = 1
log_slave_updates = 1
mysqlx_port = 33060
mysqlx_socket = /mysql/data/mysql3306/socket/mysqlx.sock
# innodb settings #
innodb_buffer_pool_size = 512M
#innodb_buffer_pool_instances = 16
innodb_log_buffer_size = 100M
innodb_buffer_pool_load_at_startup = 1
innodb_buffer_pool_dump_at_shutdown = 1
innodb_lru_scan_depth = 4096
innodb_lock_wait_timeout = 20
innodb_io_capacity = 5000
innodb_io_capacity_max = 10000
innodb_flush_method = O_DIRECT
innodb_log_file_size = 1G
innodb_log_files_in_group = 2
innodb_purge_threads = 4
innodb_thread_concurrency = 200
innodb_print_all_deadlocks = 1
innodb_strict_mode = 1
innodb_sort_buffer_size = 32M
innodb_write_io_threads = 16
innodb_read_io_threads = 16
innodb_file_per_table = 1
innodb_stats_persistent_sample_pages = 64
innodb_autoinc_lock_mode = 2
innodb_online_alter_log_max_size = 1G
innodb_open_files = 4096
innodb_buffer_pool_dump_pct = 25
innodb_page_cleaners = 16
innodb_undo_log_truncate = 1
innodb_max_undo_log_size = 2G
innodb_purge_rseg_truncate_frequency = 128
innodb_flush_log_at_trx_commit = 1
# replication settings #
master_info_repository = TABLE
relay_log_info_repository = TABLE
sync_binlog = 1
binlog_format = ROW
gtid_mode = ON
enforce_gtid_consistency = ON
relay_log_recovery = 1
relay_log = /mysql/data/mysql3306/relaylog/relay.log
relay_log_index = /mysql/data/mysql3306/relaylog/mysql_relay.index
slave_parallel_type = LOGICAL_CLOCK
slave_parallel_workers = 16
binlog_gtid_simple_recovery = 1
slave_preserve_commit_order = 1
binlog_rows_query_log_events = 1
slave_transaction_retries = 10
log_timestamps = system
report_host = 192.168.75.86
report_port = 3306
–report_host復制副本注冊期間要報告給源庫的復制副本的主機名或IP地址。此值顯示在源服務器上顯示副本的輸出中。如果不希望復制副本向源注冊，請將該值保留為未設置。
其他兩節點參數文件my3307.cnf、my3308.cnf中將上述文件中的 3306 全部替換為 3307、3308 即可。
5、數據庫初始化
mysql用戶操作，注意同主機參數文件名my3306.cnf 各不相同，間隔約兩分鐘分別初始化三個 MySQL 實例。
mysqld --defaults-file=/mysql/conf/my3306.cnf --initialize --user=mysql --basedir=/mysql/app/mysql8.0.28 --datadir=/mysql/data/mysql3306/data
mysqld --defaults-file=/mysql/conf/my3307.cnf --initialize --user=mysql --basedir=/mysql/app/mysql8.0.28 --datadir=/mysql/data/mysql3307/data
mysqld --defaults-file=/mysql/conf/my3308.cnf --initialize --user=mysql --basedir=/mysql/app/mysql8.0.28 --datadir=/mysql/data/mysql3307/data
6、啟動三個數據庫實例
mysqld_safe --defaults-file=/mysql/conf/my3306.cnf --user=mysql &
mysqld_safe --defaults-file=/mysql/conf/my3307.cnf --user=mysql &
mysqld_safe --defaults-file=/mysql/conf/my3308.cnf --user=mysql &
--關閉數據庫
mysqladmin -uroot -p -h 127.0.0.1 -P 3306 shutdown
7、查看初始化 root 密碼并修改
more /mysql/data/mysql3306/log/mysqld3306.log|grep password
more /mysql/data/mysql3306/log/mysqld3307.log|grep password
more /mysql/data/mysql3306/log/mysqld3308.log|grep password
如下圖所示，3306 端口 root@localhost密碼為“GW*QXYwSs7;f”，初始化密碼比較復雜，這里由于是測試環境，將其修改為“root”;
[mysql@Ops-11gOGG ~]$ mysql -uroot -p -P 3306 -S /mysql/data/mysql3306/socket/mysql3306.sock
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 8
Server version: 8.0.28
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> alter user root@'localhost' identified by 'root';
Query OK, 0 rows affected (0.01 sec)
mysql> create user root@'%' identified by 'root';
Query OK, 0 rows affected (0.02 sec)
mysql> grant all privileges on *.* to root@'%' with grant option;
Query OK, 0 rows affected (0.00 sec)
其他兩臺也是如此，并創建遠程 root 登錄賬號。
三、構建主從環境
1、主庫 3306 創建復制賬號 rep
create user rep@'%' identified by 'rep';
grant REPLICATION CLIENT,REPLICATION SLAVE on *.* to rep@'%';
我這里需要置空 gtid 信息。
reset master;
show master status;
快速構建主從
登錄3307
mysql -uroot -p -P 3307 -S /mysql/data/mysql3307/socket/mysql3307.sock
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 10
Server version: 8.0.28 MySQL Community Server - GPL
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
change master to master_host='192.168.75.86',master_port=3306,master_user='rep',master_password='rep',master_auto_position=1;
show slave status\G
start slave;
show slave status\G
mysql> start slave;
Query OK, 0 rows affected, 1 warning (1.04 sec)
mysql> show slave status\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for source to send event
Master_Host: 192.168.75.86
Master_User: rep
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql_bin.000002
Read_Master_Log_Pos: 1486
Relay_Log_File: relay.000002
Relay_Log_Pos: 373
Relay_Master_Log_File: mysql_bin.000002
Slave_IO_Running: Yes
Slave_SQL_Running: No
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 1396
Last_Error: Coordinator stopped because there were error(s) in the worker(s). The most recent failure being: Worker 1 failed executing transaction '3ba436e0-aa7c-11ec-bba1-0050568a6bf6:2' at master log mysql_bin.000002, end_log_pos 730. See error log and/or performance_schema.replication_applier_status_by_worker table for more details about this failure or others, if any.
Skip_Counter: 0
Exec_Master_Log_Pos: 157
Relay_Log_Space: 1902
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: NULL
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 1396
Last_SQL_Error: Coordinator stopped because there were error(s) in the worker(s). The most recent failure being: Worker 1 failed executing transaction '3ba436e0-aa7c-11ec-bba1-0050568a6bf6:2' at master log mysql_bin.000002, end_log_pos 730. See error log and/or performance_schema.replication_applier_status_by_worker table for more details about this failure or others, if any.
Replicate_Ignore_Server_Ids:
Master_Server_Id: 863306
Master_UUID: 3ba436e0-aa7c-11ec-bba1-0050568a6bf6
Master_Info_File: mysql.slave_master_info
SQL_Delay: 0
SQL_Remaining_Delay: NULL
Slave_SQL_Running_State:
Master_Retry_Count: 86400
Master_Bind:
Last_IO_Error_Timestamp:
Last_SQL_Error_Timestamp: 220323 16:03:06
Master_SSL_Crl:
Master_SSL_Crlpath:
Retrieved_Gtid_Set: 3ba436e0-aa7c-11ec-bba1-0050568a6bf6:1-5
Executed_Gtid_Set: 3ba436e0-aa7c-11ec-bba1-0050568a6bf6:1
Auto_Position: 1
Replicate_Rewrite_DB:
Channel_Name:
Master_TLS_Version:
Master_public_key_path:
Get_master_public_key: 0
Network_Namespace:
1 row in set, 1 warning (0.01 sec)
修復問題
show master status;
stop slave;
reset slave all;
reset master;
登錄3306
mysql -uroot -p -P 3306 -S /mysql/data/mysql3306/socket/mysql3306.sock
show master status;
reset master;
show master status;
重新構建主從
注意：從 MySQL 8.0.22 開始，START SLAVE、STOP SLAVE、SHOW SLAVE STATUS、SHOW SLAVE HOST、RESET SLAVE 均被棄用，取而代之的則是 start replica、stop replica、show replica status、show replicas 和 reset replica。 MySQL 8.0.23 版本開始，change replication source to 取代了以前一直使用的 change master to 命令。MySQL 8.0.26 版本開始，系統變量、參數等標識符中的 MASTER、SLAVE、MTS(multithreaded slave)將被 SOURCE、REPLICA 和 MTA(multithreaded applier) 取代。
登錄3307
[mysql@Ops-11gOGG conf]$ mysql -uroot -p -P 3307 -S /mysql/data/mysql3307/socket/mysql3307.sock
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 29
Server version: 8.0.28 MySQL Community Server - GPL
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> change master to master_host='192.168.75.86',master_port=3306,master_user='rep',master_password='rep',master_auto_position=1;
Query OK, 0 rows affected, 8 warnings (0.03 sec)
mysql> start slave;
Query OK, 0 rows affected, 1 warning (0.05 sec)
mysql> show slave status\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for source to send event
Master_Host: 192.168.75.86
Master_User: rep
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql_bin.000001
Read_Master_Log_Pos: 157
Relay_Log_File: relay.000002
Relay_Log_Pos: 373
Relay_Master_Log_File: mysql_bin.000001
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 157
Relay_Log_Space: 573
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 863306
Master_UUID: 3ba436e0-aa7c-11ec-bba1-0050568a6bf6
Master_Info_File: mysql.slave_master_info
SQL_Delay: 0
SQL_Remaining_Delay: NULL
Slave_SQL_Running_State: Replica has read all relay log; waiting for more updates
Master_Retry_Count: 86400
Master_Bind:
Last_IO_Error_Timestamp:
Last_SQL_Error_Timestamp:
Master_SSL_Crl:
Master_SSL_Crlpath:
Retrieved_Gtid_Set:
Executed_Gtid_Set:
Auto_Position: 1
Replicate_Rewrite_DB:
Channel_Name:
Master_TLS_Version:
Master_public_key_path:
Get_master_public_key: 0
Network_Namespace:
1 row in set, 1 warning (0.01 sec)
登錄 3308
[mysql@Ops-11gOGG conf]$ mysql -uroot -p -P 3308 -S /mysql/data/mysql3308/socket/mysql3308.sock
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 9
Server version: 8.0.28 MySQL Community Server - GPL
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
mysql> show master status;
+------------------+----------+--------------+------------------+-------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+------------------+----------+--------------+------------------+-------------------+
| mysql_bin.000001 | 157 | | | |
+------------------+----------+--------------+------------------+-------------------+
1 row in set (0.00 sec)
mysql> change master to master_host='192.168.75.86',master_port=3306,master_user='rep',master_password='rep',master_auto_position=1;
Query OK, 0 rows affected, 8 warnings (0.03 sec)
mysql> start slave;
Query OK, 0 rows affected, 1 warning (0.35 sec)
mysql> show slave status\G
*************************** 1. row ***************************
Slave_IO_State: Waiting for source to send event
Master_Host: 192.168.75.86
Master_User: rep
Master_Port: 3306
Connect_Retry: 60
Master_Log_File: mysql_bin.000001
Read_Master_Log_Pos: 157
Relay_Log_File: relay.000002
Relay_Log_Pos: 373
Relay_Master_Log_File: mysql_bin.000001
Slave_IO_Running: Yes
Slave_SQL_Running: Yes
Replicate_Do_DB:
Replicate_Ignore_DB:
Replicate_Do_Table:
Replicate_Ignore_Table:
Replicate_Wild_Do_Table:
Replicate_Wild_Ignore_Table:
Last_Errno: 0
Last_Error:
Skip_Counter: 0
Exec_Master_Log_Pos: 157
Relay_Log_Space: 573
Until_Condition: None
Until_Log_File:
Until_Log_Pos: 0
Master_SSL_Allowed: No
Master_SSL_CA_File:
Master_SSL_CA_Path:
Master_SSL_Cert:
Master_SSL_Cipher:
Master_SSL_Key:
Seconds_Behind_Master: 0
Master_SSL_Verify_Server_Cert: No
Last_IO_Errno: 0
Last_IO_Error:
Last_SQL_Errno: 0
Last_SQL_Error:
Replicate_Ignore_Server_Ids:
Master_Server_Id: 863306
Master_UUID: 3ba436e0-aa7c-11ec-bba1-0050568a6bf6
Master_Info_File: mysql.slave_master_info
SQL_Delay: 0
SQL_Remaining_Delay: NULL
Slave_SQL_Running_State: Replica has read all relay log; waiting for more updates
Master_Retry_Count: 86400
Master_Bind:
Last_IO_Error_Timestamp:
Last_SQL_Error_Timestamp:
Master_SSL_Crl:
Master_SSL_Crlpath:
Retrieved_Gtid_Set:
Executed_Gtid_Set:
Auto_Position: 1
Replicate_Rewrite_DB:
Channel_Name:
Master_TLS_Version:
Master_public_key_path:
Get_master_public_key: 0
Network_Namespace:
1 row in set, 1 warning (0.01 sec)
登錄主庫 3306 查看
show slave hosts;
[mysql@Ops-11gOGG conf]$ mysql -uroot -p -P 3306 -S /mysql/data/mysql3306/socket/mysql3306.sock
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 13
Server version: 8.0.28 MySQL Community Server - GPL
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show slave hosts;
+-----------+-------------+------+-----------+--------------------------------------+
| Server_id | Host | Port | Master_id | Slave_UUID |
+-----------+-------------+------+-----------+--------------------------------------+
| 863308 | 192.168.75.86 | 3308 | 863306 | efeadd1c-aa7c-11ec-a0e3-0050568a6bf6 |
| 863307 | 192.168.75.86 | 3307 | 863306 | e0d081ae-aa7c-11ec-9b41-0050568a6bf6 |
+-----------+-------------+------+-----------+--------------------------------------+
2 rows in set, 1 warning (0.00 sec)
mysql> show processlist;
+----+-----------------+-------------------+------+------------------+------+-----------------------------------------------------------------+------------------+
| Id | User | Host | db | Command | Time | State | Info |
+----+-----------------+-------------------+------+------------------+------+-----------------------------------------------------------------+------------------+
| 5 | event_scheduler | localhost | NULL | Daemon | 1467 | Waiting on empty queue | NULL |
| 11 | rep | 192.168.75.86:50360 | NULL | Binlog Dump GTID | 232 | Source has sent all binlog to replica; waiting for more updates | NULL |
| 12 | rep | 192.168.75.86:50420 | NULL | Binlog Dump GTID | 109 | Source has sent all binlog to replica; waiting for more updates | NULL |
| 13 | root | localhost | NULL | Query | 0 | init | show processlist |
+----+-----------------+-------------------+------+------------------+------+-----------------------------------------------------------------+------------------+
4 rows in set (0.00 sec)
兩從庫分別修改參數限制只讀模式
show variables like '%read_only%';
set global read_only=1;
set global super_read_only=1;
[mysql@Ops-11gOGG conf]$ mysql -uroot -p -P 3308 -S /mysql/data/mysql3308/socket/mysql3308.sock
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 28
Server version: 8.0.28 MySQL Community Server - GPL
Copyright (c) 2000, 2022, Oracle and/or its affiliates.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql> show master status;
+------------------+----------+--------------+------------------+------------------------------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+------------------+----------+--------------+------------------+------------------------------------------+
| mysql_bin.000001 | 544 | | | 3ba436e0-aa7c-11ec-bba1-0050568a6bf6:1-2 |
+------------------+----------+--------------+------------------+------------------------------------------+
1 row in set (0.00 sec)
mysql> show variables like '%read_only%';
+-----------------------+-------+
| Variable_name | Value |
+-----------------------+-------+
| innodb_read_only | OFF |
| read_only | OFF |
| super_read_only | OFF |
| transaction_read_only | OFF |
+-----------------------+-------+
4 rows in set (0.02 sec)
mysql> set global read_only=1;
Query OK, 0 rows affected (0.00 sec)
mysql> set global super_read_only=1;
Query OK, 0 rows affected (0.00 sec)
mysql> show variables like '%read_only%';
+-----------------------+-------+
| Variable_name | Value |
+-----------------------+-------+
| innodb_read_only | OFF |
| read_only | ON |
| super_read_only | ON |
| transaction_read_only | OFF |
+-----------------------+-------+
4 rows in set (0.01 sec)
mysql> show master status;
+------------------+----------+--------------+------------------+------------------------------------------+
| File | Position | Binlog_Do_DB | Binlog_Ignore_DB | Executed_Gtid_Set |
+------------------+----------+--------------+------------------+------------------------------------------+
| mysql_bin.000001 | 544 | | | 3ba436e0-aa7c-11ec-bba1-0050568a6bf6:1-2 |
+------------------+----------+--------------+------------------+------------------------------------------+
1 row in set (0.00 sec)
————————————————————————————
公眾號：JiekeXu DBA之路
墨天輪：http://m.sunline.cc/u/4347
CSDN ：https://blog.csdn.net/JiekeXu
騰訊云：https://cloud.tencent.com/developer/user/5645107
————————————————————————————
最后修改時間：2023-05-17 11:24:38
「喜歡這篇文章，您的關注和贊賞是給作者最好的鼓勵」
關注作者
【版權聲明】本文為墨天輪用戶原創內容，轉載時必須標注文章的來源（墨天輪），文章鏈接，文章作者等基本信息，否則作者和墨天輪有權追究責任。如果您發現墨天輪中有涉嫌抄襲或者侵權的內容，歡迎發送郵件至：contact@modb.pro進行舉報，并提供相關證據，一經查實，墨天輪將立刻刪除相關內容。
